GL260 SPECIFICATIONS
Item | Description | |
---|---|---|
Number of analog input channels | 10 channels | |
External input/
output (*1) |
Input |
Trigger or Sampling (1 channel), Logic/Pulse (4 channels)
Voltage range: Up to 24V (common ground) Signal type: Voltage, Open collector, Contact (relay) Threshold: Approx. + 2.5 V (Hysteresis: Approx. 0.5V (2.5V to 3V)) |
Output |
Alarm (4 channels)
Output signal: Open collector (pull-up to 5V by 10kΩ resistor) <Maximum rating of the output transistor> Voltage: Max. 30V Current: Max. 0.5A Collector dissipation: Max. 0.2W |
|
Sampling interval | 10 ms to 1 hour (10ms to 50ms: voltage only, Minimum interval varies by number of channels used.), External signal (*1) | |
Time scale of waveform display | 1sec. to 24 hour /division | |
Trigger,
Alarm function |
Trigger action | Start or stop capturing data by the trigger |
Repeat action | Off, On (auto rearmed) | |
Trigger source |
Start: Off, Measured signal, Alarm, External, Clock, Week or Time
Stop: Off, Measured signal, Alarm, External, Clock, Week or Time |
|
Condition Setting |
Combination: OR or AND
Analog signal: Rising (High), Falling (Low), Window-in, Window-out Logic signal: Pattern (combination of each input signal in high or low) Pulse (number of count): Rising (High), Falling (Low), Window-in, Window-out |
|
Pulse input
function |
Measurement mode
|
Rotation count (RPM) mode
Accumulating count mode Instant count mode |
Maximum number of pulse inputs |
Maximum input frequency : 50kHz
Maximum number of count : 50kC/sampling (16-bit counter) |
|
Interface to PC | USB (Hi-speed), WLAN (using B-568 option) | |
Storage
device |
Internal | Built-in 8GB Flash Memory (*2) |
External | One SD card slot (Support SDHC memory card, up to 32GB) ( * 2 ) (*3) | |
Saved contents | Captured data, Setting conditions, Screen copy | |
Display | 4.3-inch TFT color LCD (WQVGA: 480 × 272 dots) | |
Operating environment |
0 to 45 ºC, 5 to 85 % RH (non condensed)
(When operating with battery pack 0 to 40 ºC, charging battery 15 to 35 ºC) |
|
Power source | AC adapter | 100 to 240 V AC, 50/60 Hz (1 pc of adapter is attached as standard accessory) |
DC power | 8.5 to 24 V DC (DC drive cable (option B-514) is required) | |
Battery pack | Mountable battery pack (battery pack (option B-573): 7.2V DC, 2875mAh) | |
Power consumption |
Max. 36 VA
(Rating under maximum power consumption using the AC adapter, with LCD display on, and battery pack being charged.) |
|
External dimensions (W x D x H) | Approx.188 x 117 x 42 mm (excluding projections) | |
Weight | Approx. 500 g (excludes AC adapter and battery pack) |
GL260 ANALOG INPUT SPECIFICATIONS
Item | Description | |||
---|---|---|---|---|
Type of input terminal | M3 screw type terminals (Rectangular flat washer) | |||
Input method |
Photo MOS relay scanning system
All channels isolated, balanced input |
|||
Measurement range | Voltage | 20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50, 100 V, 1-5 V F.S. | ||
Thermocouple | K, J, E, T, R, S, B, N, C (W: WRe5-26) | |||
Humidity | 0 to 100% (voltage 0 to 1 V scaling conversion) – using the humidity sensor (option B-530) | |||
Filter | Off, 2, 5, 10, 20, 40 (moving average in selected number) | |||
A/D converter | Sigma-Delta type, 16 bits (effective resolution: 1/40000 of the measuring full range) | |||
Maximum
input voltage |
Between
+/– terminals |
20 mV to 1 V range: 60 Vp-p,
2 V to 100 V range: 110 Vp-p |
||
Between
input terminal / input terminal |
60 Vp-p | |||
Between
input terminal / GND |
60 Vp-p |
Software Specifications for PC
Item | Description |
---|---|
Model name | GL28-APS |
Supported OS | Windows 11 (64bit) / 10 (64bit/32bit) |
Functions | Control the GL series, Real-time data capture, and Data format conversion |
Number of groups | Up to 4 groups |
Number of CHs per 1 group | Up to number of connected module |
Maximum number of channels | 1000 ch maximum |
Settings control | AMP settings, capture settings, trigger/alarm settings, report settings, others |
Capturing data |
Real-time data (CSV, GBD Binary)
Data in Internal memory or SD memory card (CSV, GBD binary) |
Display | Analog waveforms, logic waveforms, pulse waveforms, digital values |
Display modes | Y-T View, Digital View, X-Y View between Cursors (only during replay) |
File conversion | Between cursors, All data |
Monitor functions | Alarm monitor enables sending of email to the specified address |
Statistic/History | Displays maximum, minimum and average values during measurement |
Report function | Enables creation of daily or monthly files |
WIRELESS LAN UNIT Specifications
Item | Description |
---|---|
Model number | B-568 |
Communication method | Wireless communication (using radio waves in the 2.4GHz band) |
Installation |
Attach to the wireless LAN connection terminal
* When the wireless unit is inserted, the SD memory card cannot be inserted into the SD CARD slot. |
Wireless LAN standard | IEEE802.11b/g/n |
Function |
Control from PC, data transfer to PC, control and data transfer from smartphone/tablet
• For access point: Local control and transfer are possible. • For station: In addition to local, remote control and transfer using G-REMOTE is also possible. Communication range: Approx. 40 m * Communication range depends on the obstacles and the surrounding environmental conditions. WPS: Push button method / PIN method Encryption function: WEP64, WEP128, WPA-PSK/WPA 2-PSK (TKIP/AES) * WPA/WPA2 and TKIP/AES are automatically selected. |
Humidity Sensor B-530 (option) Specifications
Item | Description | |
---|---|---|
Allowable temperature range | -25 to 80℃ | |
Allowable humidity range | 0 to 100% RH | |
Relative humidity measurement accuracy | ±3% RH(5 to 98% RH at 25℃) | |
Method | Capacitance method | |
Relative humidity measurement accuracy (5 to 98%) | Measurement environment | Measurement accuracy |
0 to 10℃ | ±5% RH | |
10 to 20℃ | ±4% RH | |
20 to 30℃ | ±3% RH | |
30 to 40℃ | ±4% RH | |
40 to 50℃ | ±5% RH | |
50 to 60℃ | ±6% RH | |
60 to 70℃ | ±7% RH | |
70 to 80℃ | ±8% RH | |
* Measurement accuracy at 60℃ or more is a reference value. | ||
Response time | 15 sec. (90% response when membrance filter is installed) | |
Sensor output | 0 to 1 VDC | |
External dimensions | Φ14 x 80 mm (excluding cable) | |
Cable length | 3 m | |
Sensor power source | DC + 5 to +16 V | |
Power consumption | approx. 4 mA |
OVERVIEW | G-REMOTE | SOFTWARE | SPECIFICATIONS | ACCESSORIES | DOWNLOAD