Graphtec Craft ROBO Driver OPS653 Ver. 4.10B
for Microsoft Windows XP x64 Edition/Windows Vista x64 Edition/Windows 7 x64 Edition

Thank you for choosing the Graphtec OPS653 Craft ROBO Driver. 

The README.TXT file in each directory contains instructions on installation and
operation as well as other notes. Be sure to read them carefully before 
installing or using this driver.

Before you begin installation, check that the program disk contains the 
following:

  WINXP_VISTA_X64\DISK1           For Windows XP x64 Edition /
  WINXP_VISTA_X64\GPCR.GPD            Windows Vista x64 Edition /
  WINXP_VISTA_X64\CC300.GPD           Windows 7 x64 Edition
  WINXP_VISTA_X64\CC300L.GPD
  WINXP_VISTA_X64\CC330.GPD
  WINXP_VISTA_X64\CC330L.GPD
  WINXP_VISTA_X64\GPCR64.INF
  WINXP_VISTA_X64\GPCR64.CAT
  WINXP_VISTA_X64\GPCR64.DLL
  WINXP_VISTA_X64\GPCRUI64.DLL
  WINXP_VISTA_X64\GPCRUI.CHM
  WINXP_VISTA_X64\GTCCRMON64.DLL
  WINXP_VISTA_X64\README.TXT

Required PC specifications
(The specication needs to be higher than recommended specification
 by using OS)

* OS             : Windows XP x64 Edition
                    (Proffesional)
                   Windows Vista x64 Edition
                    (Home Basic, Home Premium, Business, Ultimate)
                   Windows 7 x64 Edition
                    (Ultimate, Enterprise, Professional, Home Premium)
* CPU            : 1GHz 64-bit (x64) processor or faster
* Memory         : 512MB or larger
* Display        : 1024x768 True Color
* Mouse
* CD-ROM drive
* USB interface  : USB2.0(Full Speed)
Note:
 The interface which can be used depends on the plotter model.
 The plotter needs to be connected with either interface.

Precautions to be observed when connecting the Graphtec Craft ROBO
via USB.
   * Operation with other than the included driver is not guaranteed.
   * Do not connect multiple plotters to a single computer.
   * Operation is not guaranteed if the plotter is connected to a USB hub
     or to a USB extension board.

END